Table of Contents
Advertisement
Area:
Auto Configuration
The entire configuration process or a large part of the configuration for a VoIP connection
is automated for many VoIP providers. You can download the necessary VoIP access data to
your telephone from the Internet.
You have the following options:
u
Fully automated configuration
Preconditions:
– You have received an auto configuration code from your VoIP provider.
– The general access data for your VoIP provider is available for downloading.
You can download all the data required for VoIP access from the Internet:
¤
Enter the auto configuration code you received from your VoIP provider in the
area in the
Configuration
¤
Click
Start Auto
The telephone establishes a connection to the Internet and downloads all data required
for the VoIP connection, i.e. the general provider information and your personal pro-
vider data (account data) are saved to your base station.
If further information is used on the Web page, this is deleted as soon as
Configuration
is clicked. The fields in the
areas and the server addresses in the
data.
Generally, you should not have to enter any additional data on this Web page.
Please note:
If the message
Download of settings not possible! File is corrupt!
the phone. Possible causes of this are:
– The incorrect code has been entered (e.g. upper/lower case rules have not been followed). If
necessary, enter the code again.
– The file that has been downloaded is invalid. Please consult your VoIP provider.
When the download is complete, the
¤
Activate the connection as described under page 130.
You can now be reached on the corresponding VoIP phone number.
u
Automatic configuration of general VoIP provider data
Precondition: You have received your account details from your VoIP provider
(e.g.
Authentication
Profile files of the most important VoIP providers are available on the Gigaset Internet
server for downloading. The address for the server is stored in your phone (page 149).
Proceed as follows to load the data onto your telephone:
¤
In the
Auto Configuration
the download procedure.
Please note:
If you click the
Select VoIP Provider
be saved and checked. Values may need to be corrected before the
started.
Auto Configuration Code
Configuration.
Name,
Authentication
area, click
Select VoIP
button, any changes that have been made to the Web page will
Web configurator – configuring the telephone via a PC
field.
Personal Provider Data
area are overwritten by the downloaded
Network
appears, no data will be loaded onto
Connections
list will be displayed.
password).
Provider. This will display information on
Configuring telephone connections
Start Auto
and
General Provider Data
Select VoIP Provider
operation is
Auto
125
Advertisement
Table of Contents
