Table of Contents
Advertisement
Web configurator – configuring the telephone via a PC
Connect the PC with the telephone's Web configurator
Connect the PC with the telephone's Web configurator
Precondition: The settings of a firewall installed on your PC allow the PC and phone to
communicate with each other.
There are two ways of connecting your PC to the base station Web configurator:
u
via the (local) IP address of the base station
u
via Gigaset config
Establishing a connection via the IP address:
¤
Establish the telephone's current IP address on the handset:
You can see the phone's current IP address in the handset display by briefly pressing the
paging key on the base station.
Your phone's IP address can change if you have activated dynamic IP address assignment
(page 120).
¤
Launch the Web browser on your PC.
¤
Enter http:// and the telephone's current IP address (for example: http://192.168.2.2)
into the address field of the Web browser.
¤
Press the return key.
A connection is established to the phone's Web configurator.
Establish a connection via Gigaset config:
Precondition: The router is connected to the Internet and your PC can access the Internet
via the router.
¤
Launch the Web browser on your PC.
¤
Enter the following URL into the Web browser's address field:
http://www.Gigaset-config.com
¤
Press the return key.
You will receive a message stating the connection will be forwarded to your base station.
If several Gigaset VoIP phones can be reached via your Internet connection, you will be
asked to which one of these phones you would like to be forwarded.
After successfully forwarding the connection, the
Web browser of the Web configurator.
Please note:
The connection between the PC and the Web configurator is a local connection (LAN connection).
The Internet is only accessed to establish the connection.
114
Web page will be displayed in the
Login
Advertisement
Table of Contents
