Table of Contents
Advertisement
Making calls with VoIP and the fixed line network
Making an external call
Selecting the connection type using display keys and making a call
Precondition: The display keys on your handset have been assigned
(page 97).
/
§FixedLine§
§IP§
Press the display key to select the connection type.
~ s
Enter the number or select from the directory.
c / d Press the talk or handsfree key.
The number will always be called via the selected connection type.
Please note:
If you have pressed the
– ... dialled the number with suffix #1 to #6, your call will be made via the VoIP account assigned to
the suffix. The number will not be dialled if the suffix is invalid (e.g. no VoIP connection assigned).
– ... dialled the number without a suffix or with the suffix #0, your call will be made via the hand-
set's VoIP send number.
Do not enter a suffix if you have pressed the display key
fix will be dialled together with the number over the fixed line network. This may cause errors!
Select and dial a connection via your line suffix
You can configure up to six VoIP numbers on your phone in addition to the fixed line net-
work number and the Gigaset.net number. A (line) suffix is assigned to each number (line)
of your phone:
u
the fixed line number has the suffix #0
u
VoIP numbers have the suffixes #1 to #6 (page 123)
u
and the Gigaset.net number has the suffix #9
When dialling, you can use this line suffix to specify the connection via which you would
like to call or be charged.
~
Enter the number of the party you wish to call.
~
Add the suffix for the connection (your phone number) through which you
wish to make and pay for the call.
c
Press the talk key.
The connection is always made via the line with the assigned suffix, regardless of whether
you press the call key c briefly or press and hold.
Example: If you enter the number 1234567890#1 and press the talk key c, the number
1234567890 will be dialled via the first VoIP connection in the configuration.
Please note:
If you specify a suffix for which no VoIP connection is configured in your base station, the VoIP status
code 0x33 will be displayed. The number will not be dialled.
32
before dialling and ...
§IP§
§FixedLine§
prior to dialling. Otherwise the suf-
and/or
§FixedLine§
§IP§
Advertisement
Table of Contents
