Restoring The Factory Setting; Querying The Status - Gigaset 4170 isdn Operating Instructions Manual

Restoring the factory setting

Restoring the factory setting
Step
by
You can choose the settings that are to be restored:
Step
G Operational
AM PIN (for Gigaset 4175isdn only) is set to 0000.
G Reset all
reset to "0000". All entries (missed calls list, costs) are deleted.
For both functions: Before resetting, you must deactivate all active call for-
Info
warding settings. Remote control of the answering machine is disabled. The
handsets remain registered.
Press G for selection menus.
1.
Select using [
2.
Spec. function
3. Confirm with [OK].
Enter the system PIN and confirm with
4.
Operational
5.
Acknowledge the message
Settings
reset
and wait for the confirmation tone.
or Select using [
5.
6. Answer [YES] to the question
Reset
factory
defaults?
Confirm the message

Querying the status

You can query the status of the following settings:
Callback
G
G Withhold no.
G Call forwarding
G Ext.occupations
G AB1, AB2, AB3
Press G for selection menus.
1.
Select using [
2.
Press [OK] to open the status list
3.
( before an item = system function active).
30
– All MSNs and prefixes (exchange codes) are deleted and the
– All functions are reset to the default settings. The system PIN is
Á ] and [OK]: Base Settings
→
Factory setting.
is displayed. Confirm with [OK].
Á
] Reset all and confirm with [OK].
Reset all and wait for the confirmation tone.
Á ] and [OK]: Base Settings
→ →
Settings System settings
[OK].
→
Status
→