Table of Contents
Advertisement
Using the network mailbox
Configuring the network mailbox for fast access
Please note:
For information on how to activate and deactivate network mailboxes via the web configurator and
to change their assigned numbers, see, see page 141.
Configuring the network mailbox for fast access
You can use fast access to make direct calls to a network mailbox.
Assigning key 1 of the handset, changing assignments
The setting for fast access is handset-specific. You can assign a different answer machine
to key
on each registered handset.
No answer machine is preconfigured for fast access in the default settings.
Fast access is not yet set on the handset: Press and hold the key
.
Or:
¢
¢
v
Ð
Settings
The list of connections (VoIP and fixed line network) that are assigned to the handset as
receive numbers is displayed. The display shows
relevant default name for the connection
s
Select connection and press
If a number is already saved to the base station for the selected network mailbox, fast
access is activated.
a
Press and hold (idle status).
If no number has been saved for the network mailbox a message is displayed to this effect.
You will be prompted to enter the number for the network mailbox.
s
Jump to the
~
Enter the number for the network mailbox.
Press the display key.
§Save§
a
Press and hold (idle status).
Fast access is automatically activated.
Please note:
You can only assign fast access to one answer machine.
However, you can also call the network mailbox assigned to a handset's receive numbers directly via
the message key (page 87).
Calling the network mailbox
Press and hold.
If you have set a network mailbox for fast access you will be connected straight to this net-
work mailbox.
d
If necessary, press the hands-free key.
You will hear the answer machine announcement.
86
¢
Voice Mail
Set Key 1
§OK§
line.
Number
xxx, where xxx is replaced by the
Net AM:
(IP1
to IP6,
Fxd.
line).
‰
(
= on).
Advertisement
Table of Contents
