Table of Contents
Advertisement
Web configurator – configuring the telephone via a PC
Configuring telephone connections
Configuring the VoIP connection
Open the Web page:
¤
Open the following Web page:
¤
Click
Edit
next to the VoIP connection that you want to configure or the configuration of
which you want to change.
This will open a Web page where you can make the settings that your phone needs to
access your provider's VoIP server.
The Web page always displays the following areas:
u
IP Connection
(page 124),
u
Auto Configuration
u
Personal Provider Data
The areas
u
General Provider Data
u
Network
(page 127)
can be shown and hidden by clicking the
buttons.
You must enter the VoIP provider's general access data in these areas. You can download
this data for many VoIP providers from the Internet (see "Area: Auto Configuration").
¤
Make the settings on the Web page.
¤
Save them in the phone, see page 129.
¤
Activate the connection if necessary, see page 130.
Area:
IP Connection
Connection Name or Number
Enter a name for the VoIP connection or the VoIP phone number (max. 16 characters).
This name is used to display the connection on the handset and the Web configurator
interface, e.g. during allocation of send and receive numbers (page 134), for the call
display (page 35).
124
Settings
(page 125),
(page 126).
(page 127) and
¢
¢
Telephony
Connections.
Show Advanced Settings
and
Hide Advanced Settings
Advertisement
Table of Contents
