Gigaset C470 IP Manual page 126

Hide thumbs Also See for C470 IP:
Table of Contents

Advertisement

Web configurator – configuring the telephone via a PC
Configuring telephone connections
The download procedure has several steps:
¤
Click Next.
¤
From the list, select the country for which the list of VoIP providers is to be loaded.
¤
Click Next.
¤
Select your VoIP provider from the list.
If your provider is not included in the list, select
have to enter the general provider data by hand (see "Area: General Provider Data"
and "Area: Network" below).
¤
Click Finish.
The details of the selected provider are loaded to your phone and saved under
(page 127) and
Provider Data
in these areas.
The field
Provider
provider's homepage is displayed where available.
To complete configuration of your VoIP connection enter your account data under
Personal Provider
Area:
Personal Provider Data
Enter the configuration data that is necessary for accessing your VoIP provider's SIP service.
You will receive this data from the VoIP provider.
The field names
(Authentication Name
may change. If you have already downloaded the provider's general details
Provider" button, see above), field entries will be replaced by provider-specific names to
facilitate orientation (e.g. SIP-ID instead of
Authentication Name
Specify the registration or authentication ID agreed with your VoIP provider. The regis-
tration ID serves as the access ID that your phone must specify when registering with
the SIP proxy/registrar server. The
i.e. to your Internet phone number.
Authentication password
Enter the password that you have agreed with your VoIP provider in the
field. The phone needs the password when registering with the SIP proxy/reg-
password
istrar server.
Username
Enter the caller ID for your VoIP provider account. This ID is usually identical to the first
part of your SIP address (URI, your Internet phone number).
Example: If your SIP address is "987654321@provider.com", enter "987654321" in
Username.
Display name (optional)
Enter any name that should be shown in the other caller's display when you call them
via the Internet (example: Anna Sand). All characters in the UTF8 character set (Uni-
code) are permitted. The name must not exceed 32 characters.
If you do not enter a name, your
Ask your VoIP provider if this feature is supported.
126
Network
shows the name of the selected provider or
Data.
etc.) listed in the following are standard names and
Authentication Name
Username
Other
(page 127). You cannot make any further entries
Authentication
Name).
is mainly identical to the Username,
VoIP phone number will be displayed.
Provider. In this case you will
Other
Provider. A link to the
("Select VoIP
Authentication
General

Advertisement

Table of Contents
loading

Table of Contents