Table of Contents
Advertisement
First steps
Making settings for VoIP telephony
If there is already an entry under this name, you will receive a message to this effect and
you will be asked to enter a name again.
If an entry in the Gigaset.net directory is successful, the message
successfully added to
Gigaset.net!" is displayed briefly.
If the attempt to create the entry fails (e.g. because the phone is not connected to the Internet), a
message to this effect is displayed briefly (see page 23). You can then create the entry later via the
Gigaset.net directory (see page 44).
Completing the VoIP settings
After the entries have been completed, the handset reverts to idle status.
If all the settings are correct and if the phone can establish a connection to the VoIP server,
then the internal name of the handset will be displayed (example):
Ð
INT 1
INT
You can now use your phone to make calls via the fixed line network and the Internet.
Callers can reach you on your fixed line number and your VoIP number.
Please note:
– To ensure that you can always be reached via the Internet, the router must be permanently con-
nected to the Internet.
– If you try to make a call via a VoIP connection that is not configured correctly, the following VoIP
status message will appear on the display:
VoIP status code). The various status codes and their respective meanings can be found on
page 157.
No connection to the Internet/VoIP server
If one of the following messages is displayed instead of the internal name after the con-
nection assistant is closed, errors have occurred:
u
Server not accessible!
u
Provider registration failed!
Below you will find possible causes and measures you can take.
22
V
SMS
IP configuration error: xxx
"Your user name is
or
VoIP config.error: xxx
(xxx =
Advertisement
Table of Contents
