Logging in, setting the Web configurator language
Once you have successfully established the connection, the
displayed in the Web browser.
You can select the language you want the menus and Web configurator dialogues to be
displayed in. The language that is currently selected is displayed in the top field of the
Web page.
¤
If necessary, click
¤
Select the language.
¤
In the bottom field of the Web page, enter your phone's system PIN (default setting:
0000) to access the Web configurator functions.
¤
Click OK.
Once you have successfully logged in, a
the Web configurator.
Please note:
– If you have forgotten your system PIN, you must restore your device's factory settings. Please note
that this will restore all other settings too (page 104).
– If you do not make any entries for a lengthy period (around 10 minutes), you will be automatically
logged off. The next time you try to make an entry or open a Web page, the
be displayed. Enter the system PIN again to log in again.
– Any entries that you did not save on the phone before automatic log-off will be lost.
Logging off
In the menu bar (page 117) at the top right of every Web page in the Web configurator,
you will see the
Log Off
Warning:
Always use the
Log Off
close the Web browser without logging off beforehand, it is possible that access to the Web configu-
rator will be blocked for a few minutes.
to open the list of available languages.
command. Click
command to end the connection to the Web configurator. If, for example, you
Web configurator – configuring the telephone via a PC
Logging in, setting the Web configurator language
screen opens with general information on
Home
to log off from the Web configurator.
Log Off
Login
Web page will be
Login
Web page will
115