Table of Contents
Advertisement
Copy date and time from time server
The date and time are shown in the idle display of registered handsets. They are important,
for example, for stating the correct time in the calls list and for the "alarm clock" function.
There are two methods for updating the time and date on your base station: manually with
one of the registered handsets (page 13) or automatically by synchronisation with a time
server on the Internet.
Activate/deactivate synchronisation with a time server as follows:
¤
Open the following Web page:
¤
In the
Automatic adjustment of System Time with Time Server
chronisation between base station and a time server. If you select
will not adopt time settings from a time server. In this case you should set the time and
date manually using a handset.
¤
The
Last synchronisation with time server
compared time and date settings with a time server.
¤
In the
Time Server
the base station should adopt its time and date settings. The time server
"europe.pool.ntp.org" is set as default on the base station. You can overwrite the set-
ting.
¤
From the
Country
¤
The
Time Zone
field shows the valid time zone for the Country. It shows the deviation
between local time (not summer time) and Greenwich Mean Time (GMT).
If a country is divided into various time zones, they will all appear in the list. Select the
appropriate
Time Zone
¤
The
Automatically adjust clock to summer-time changes
zone differentiates between summer time and winter time.
Activate
On
if you want the time to change automatically to summer time or winter time
when summer time begins and ends respectively.
Activate
if you do not want to change to summer time.
Off
Please note: If the date and time are updated by a time server that automatically
switches between summer time and standard time, you must always activate
¤
Click
Set
to save the settings in your phone.
Once you have activated synchronisation, the time and date will be compared with a time
server as soon as an Internet connection is established.
Synchronisation will usually occur once a day (at night) if synchronisation is activated. Any
additional synchronisation will take place only after each new system start of the base sta-
tion (e.g. after a firmware update or a power cut).
If you register a new handset on your base station it will assume the time and date of the
base station without any additional synchronisation with the time server.
Date and time settings are transferred to every handset after synchronisation.
Settings
field, enter the Internet address or name of the time server from which
list, select the country in which your base station is being operated.
for the base station from the list.
Web configurator – configuring the telephone via a PC
¢
Miscellaneous.
field select
field shows the last time when the base station
field will be displayed if your time
Copy date and time from time server
to activate syn-
Yes
No
the base station
Off
here.
151
Advertisement
Table of Contents
