Table of Contents
Advertisement
Web configurator – configuring the telephone via a PC
Opening Web pages
– Alternative options. The active option in the list is highlighted with
active option with
vated option is deactivated. You can only deactivate an option by activating another
option.
Applying changes
As soon as you have made your change on a page, activate the new setting on the phone
by clicking Set.
If your input in a field does not comply with the rules for this field, an appropriate error
message will be displayed. You can then repeat the input.
Warning:
Changes that have not been saved on your phone are lost if you move to another Web page or if the
Web configurator is terminated, e.g. due to the time limit (page 115).
Buttons
Buttons are displayed in the bottom section of the working area.
Set
Save entries on the phone.
Cancel
Reject changes made on the Web page and reload the settings that are currently saved
in your phone to the Web page.
Opening Web pages
A brief outline of the navigation to the individual Web configurator functions is given
below.
Example:
Setting DTMF signalling
¢
Settings
Telephony
To open the Web page, carry out the following steps after registration:
¤
Click the
Settings
¤
Click the
Telephony
The subfunctions of
¤
Click the
Advanced Settings
The Web page from Figure 2 will be shown in the Web browser.
118
. You can activate an option by clicking
¢
Advanced Settings
menu in the menu bar.
function in the navigation area.
are displayed in the navigation tree.
Telephony
subfunction.
, and the non-
. The previously acti-
Advertisement
Table of Contents
