Querying The Phone Status - Gigaset A580 IP User Manual

Web configurator – Setting the phone using a PC
Please note
u
The default time server "europe.pool.ntp.org" will remain stored in the base sta-
tion even if you overwrite it. If you delete your time server from the Time Server
field and synchronisation is still activated, the base station will continue to syn-
chronise with the default time server. However, it will no longer appear in
the Time Server field.
u
If you have entered your own time server in the Time Server field and the base
station is unable to synchronise for ten consecutive attempts, the base station
will synchronise with the default time server on the next synchronisation.
u
If you have deactivated synchronisation with a time server, and if the date and
time are not set on any handset, then the base station will attempt to reference
date and time settings from the CLIP information of an incoming call.

Querying the phone status

General information about your phone is displayed.
¤
In the menu list, select the Status tab.
The following information is displayed:
Area: IP Configuration
IP address The phone's current IP address within the local network. For assigning the IP
address,
MAC address
The phone's device address.
Area: Software
Firmware version
Version of the firmware currently downloaded on the phone. You can download
updates of the firmware to your phone (
ble on the Internet.
EEPROM version
Version of your phone's EEPROM storage chip (
148
£
Page 107.
£
Page 91). Firmware updates are availa-
£
Page 176).