Safety Precautions; Assembly Steps - TuffStuff TS-1000 Owner's Manual

S F
afety irst
Regardless of how enthusiastic you may be about getting on
your equipment and exercising, take the time to ensure that
your safety is not jeopardized. A moment's lack of attention
can result in an accident, as can failure to observe certain
simple safety precautions.
1. Read, study and understand the Owner's Manual and all
the warning labels on this product.
recommended to familiarize yourself and others with the
proper operation and workout recommendations for this
Tuff Stuff product prior to use. Some of this information
can be obtained in this Owner's Manual, as-well-as from
your local Tuff Stuff retailer.
2. It is imperative that you retain this Owner's Manual and be
sure all warning
Replacement Owner's Manuals and labels are available
from your local Tuff Stuff retailer.
3. Consult with your physician before beginning any exercise
program.
4. Use proper discretion when children are present.
Push Pull Pin
1/2 X 3-1/2 (#56)
Turn/Pull Pin
w/Knob (#57)
ig. 1 Illustration above depicts the location of the Push Pull Pins 1/2" X
-1/2 (#56), Push Pull Pins 1/2" X 5-5/8 (#58), and the Turn/Pull Pin w/
Knob (#57) on this unit.
TS-1000 Home Gym w/Adjustable High-Low Pulley System

Safety Precautions

Furthermore, it is
labels are legible and
Push Pull Pin
1/2 X 3-1/2 (#56)
Push Pull Pin
1/2 X 5-5/8 (#58)
5. Frayed or worn cables can be dangerous and may cause
injury. Periodically check these cables for any indication
of wear.
6. Keep hands, limbs, loose clothing and long hair well out of
the way of moving parts.
7. Do not attempt to lift more weight than you can contro
safely.
8. Inspect the Unit for any sign of wear on parts, hardware
becoming loose or cracks on welds. If a problem is found
do not use or allow the machine to be used until the
defective part is repaired or replaced.
intact.
9. Pay special attention to the
(#56) located on the
and the High-Low Carriage
X 5-5/8 (#58)
also the Turn/Pull Pin w/Knob (#57)
Extension Bench Frame
are fully engaged into the selected holes. Refer to Fig. 2
3 for further illustration of this instruction.
CAUTION
Fig. 2 Caution: Check that the two Push Pull Pins 1/2 X 3-1/2 (#56
located on the Press Bar Selector Housing
Carriage (#14), also the
and the Front Upright (#6)
Press Bar (#23),
Pad Bracket (#7).
CAUTION
Fig. 3 Caution: Check the Turn/Pull Pin w/Knob (#57) to be full
engaged into the selected hole of the
Push Pull Pins 1/2 X 3-1/2
Press Bar Selector Housing (#23)
(#14), the
located on the and the Front Upright (#6)
(#9). See Fig.1. Be sure they
(#23), and the
Push Pull Pins 1/2 X 5-5/8 (#58)
are fully engaged into the selected holes of th
High-Low Selectorized Upright
Turn/Pull Pin w/Knob
Fully Engaged
Adjustable Seat Frame (#37).
Push Pull Pins 1/2
located on the Leg
Push Pull Pin
1/2 X 3-1/2
Fully Engaged
High-Low
located on th
(#13), and the Bac
2