TuffStuff TS-1000 Owner's Manual page 24

IG. 65 Once you have adjusted the cables according to the Cable
Adjustment Diagram on the previous page, then locate the two
Shrouds (#46) and affix them to the
#20) U-Nuts 1/4" (#81-Not shown) using four Hex Head Cap Screws 1/4-
0 X 3/4 (#105), and four Nylon Flat Washers 1/4" (#78). Refer to the Ex-
loded View Diagram on Fold out page for further illustration of this as-
embly.
23
Weight
Guide Rod Retainer Housing's
FIG. 66 Next, affix the bottom of the two
Base Frame's (#1) U-Nuts 1/4" (#81-Not shown) using four Hex Hea
Cap Screws 1/4-20 X 3/4 (#105), and four Nylon Flat Washers 1/4" (#89
Refer to the Exploded View Diagram on Fold out page for further illustra
tion of this assembly.
Fully Fasten: Proceed to align and fully fasten these hardware as
semblies.
FULLY FASTEN
TS-1000 Home Gym w/Adjustable High-Low Pulley System
Weight Shrouds (#46) to th