TuffStuff TS-1000 Owner's Manual page 22

IG. 59 Locate the Coil Chain 3/16 X 21 (#111), two Snap Links (#110)
nd attach them to the Low Row Bar 20" (#42)
Extension/ Abdominal Cable
IG. 61 Affix the Chrome Stirrup Handle (#44) to the
#35) using one Snap Link (#110), one Shoulder Bolt 3/8 x 3/4 (#106), and
ne Nylon Insert Lock Nut 5/16-18 (#94). Use the supplied Hex Key
/16" (#114) and a 1/2" combination wrench to fasten this assembly prop-
rly.
Note: Refer to the High-Low Cable Mapping Diagram on page 26
for further illustration of this assembly.
NOTE:
21
and to the
(#34), as shown above.
High-Low Cable
FIG. 60 Affix the Abdominal Crunch Harness (#45) to the
Leg sion/Abdominal Cable (#34)
Bolt 3/8 x 3/4 (#106), and one Nylon Insert Lock Nut 5/16-18 (#94). Us
the supplied Hex Key 3/16" (#114) and a 1/2" combination wrench to fas
ten this assembly properly.
Note: Refer to the Leg Extension/Abdominal Cable Mapping Dia
gram on page 25 for further illustration of this assembly.
NOTE:
FIG. 62 The Leather Ankle Strap (#43) is another accessory that ca
be used at the High-Low Station. Adjust the
to the first Adjustment setting, as shown above, then connect the
Low Cable (#35)
(#110).
TS-1000 Home Gym w/Adjustable High-Low Pulley System
using one Snap Link (#110), one Shoulde
High-Low Carriage (#14
to the Leather Ankle Strap (#43) using the Snap Lin
Leg Exten
High