TuffStuff TS-1000 Owner's Manual page 4

IG. 4 On a flat surface, lay the
Plastic End Caps w/Groove 2" Sq. (#70) onto the tube-ends of the
rame (#1), as shown above.
Note: When positioning the
complete area surface of the TS-1000. Use the overhead view on
NOTE:
the cover page for designing your layout before assembling.
IG. 6 Next, attach the Low Row Foot Support (#3)
Stabilizer (#2) and secure it into place using one
#4). Using the supplied Hex Key 3/16" (#114), secure the
ube (#4) into place using one Set Screw 3/8-16 x 1/2 (#51), as shown in
aption above.
Note: Be sure the Foot Roll Tube (#4)
inserted into the Low Row Foot Support
NOTE:
3
Base Frame (#1) down and insert two
Base Frame (#1) consider the
to the Low Row
Foot Roll Tube 1 x 16
Foot Roll
is flush on each end after
(#3).
FIG. 5 Next, using a rubber mallet, insert four Plastic Insert Caps 1
Rd. (#75) into the four tube-ends of the
Base
Foot Roll Tube 1 x 16
FIG. 7 Insert the
Base Frame (#1), as shown above.
TS-1000 Home Gym w/Adjustable High-Low Pulley System
Low Row Stabilizer (#2)
(#4).
Low Row Stabilizer (#4) into the receptacle on th
and th