Download Print this page

Safety Precautions - TuffStuff SP-4415 Assembly Manual

Inner/outer thigh

Advertisement

Introduction
A
bout the Inner/Outer Thigh SP-4415
Congratulations on your new purchase of the Inner/Outer Thigh.
We hope you are completely satis ed with this product and wish
you many years of enjoyment.
T
uff Stuff Equipment
This Tuffstuff product has been built to precise quality standards and
has been carefully packaged to ensure that damage will not occur
during shipment. The TuffStuff Warranty and signature indicating
final inspection has been conducted by our line foreman, is an
expression of our con dence in the completeness, the materials,
and workmanship of this product.
W
arranty
SEE A COPY OF WARRANTY ON BACK PAGE.
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on le with our factory,
be sure to complete the warranty registration card and send it to
TuffStuff Fitness Equipment today.
S
pecifi cations
1. Maximum Wt. Capacity
2. Total Machine Weight
3. Footprint (LWH)
Note: Due to continuing product improvements, speci cations and designs are subject to change
without notice.
S
F
afety
irst
Regardless of how enthusiastic you may be about getting on
your equipment and exercising, take the time to ensure that your
safety is not jeopardized. A moment's lack of attention can result
in an accident, as can failure to observe certain simple safety
precautions.
1. Read, study and understand the Assembly Instructions and all the
warning labels on this product. Furthermore, it is recommended
to familiarize yourself and others with the proper operation and
workout recommendations for this Tuff Stuff product prior to
use.
2. It is imperative that you retain this Assembly Instructions and
be sure all warning labels are legible and intact. Replacement
Assembly Instructions and labels are available from your local
Tuff Stuff retailer.
3. Consult with your physician before beginning any exercise
program.
2
- 150 lbs.
- 487 lbs.
- See Front Cover.

Safety Precautions

P
rior to the Assembly of the Inner/Outer Thigh
1. We advise you to consult your local Tuff Stuff retailer if you should
have a question or problem regarding the proper assembly of
this unit.
T
ool Requirements
1. One 7/8" combination wrench
2. One 3/4" combination wrench
3. One 9/16" combination wrench
4. One 7/16" combination wrench
5. One ratchet
6. One 3/4" socket
7. One 9/16" socket
8. One 7/16" socket
9. External Retaining-ring pliers
10. One rubber mallet
11. Windex or household glass cleaner
12. Measuring tape
13. Utility knife
Hardware Measurement Diagram
4. Frayed or worn cables can be dangerous and may cause injury.
Periodically check the cable for any indication of wear.
5. Use proper discretion when children are present.
6. Keep hands, limbs, loose clothing and long hair well out of the
way of moving parts.
7. Do not attempt to lift more weight than you can control safely.
8. Inspect the Unit for any sign of wear on parts, hardware becoming
loose or cracks on welds. If a problem is found do not use or
allow the machine to be used until the defective part is repaired
or replaced.
SP-4415 Inner/Outer Thigh

Advertisement

loading