TuffStuff TS-1000 Owner's Manual page 16

IG. 52 Press down the Closed-End Double Pulley Bracket (#31)
pply tension to the Leg Extension/Abdominal Cable
ttach the Adjustable Back Pad Bracket (#7)
sing the previously removed Hardware (one Hex Head Cap Screw 3/8-16
3 1/4 (#99), two Flat Washers SAE 3/8" (#87), two Nylon Flat Washer
/8" (#88), and one Nylon Insert Jam Lock Nut 3/8-16 (#93).
IG. 54 Route the High-Low Cable (#35)
1/2 Rd. (#67-Labeled C3)
Note: Refer to the Cable Mapping Diagram on page 26 for further
detailed illustration of the
NOTE:
15
(#34). Then, re-
to the Front Upright (#6)
up and over the Nylon Pulley
High-Low Cable (#35) routing.
to FIG. 53 Route the
leys 3 1/2 Rd. (#68-Labeled C1, C2), then up between the Nylon Pulley
1/2 Rd. (#68-Labeled C2) and the Hex Head Cap Screw 1/4-20 x 1 1/
(#104). Continue routing the cable up through the tube of the
Double Pulley Bracket
Note: Refer to the Cable Mapping Diagram on page 26 for furthe
detailed illustration of the
NOTE:
FIG. 55 Route the
1/2 Rd. (#67-Labeled C4) passing through the opening of the
Assembly (#12).
Note: Refer to the Cable Mapping Diagram on page 26 for furthe
detailed illustration of the
NOTE:
TS-1000 Home Gym w/Adjustable High-Low Pulley System
High-Low Cable (#35) between the two Nylon Pu
(#15).
High-Low Cable (#35)
High-Low Cable (#35) down to the Nylon Pulley 4
High-Low Cable (#35)
High-Low
routing.
Top Pulley
routing.