Installing The Sodimm - DFI ES520-HU User Manual

Installing the SODIMM

1. The SODIMM socket is located on the system board.
SODIMM socket
2. Note the key on the socket. The key ensures that the memory module can be plugged into
the socket in one direction only.
Chapter 3 Installing the Device
Chapter 3
3. Grasping the memory module by its edges, align it into the socket at an angle of
approximately 30 degrees. The memory module must be installed into the socket without
any gap between the SODIMM socket and the gold finger.
4. Press the memory module down until the clips at each end of the socket lock into position.
You will hear a distinctive "click", indicating the module is correctly locked into the socket.
13
SODIMM Module
Clip
Clip
www.dfi.com