17.
Select Previous Menu until you return to the Intel(R) AMT Configuration menu. Select
User Consent then press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808
Copyright(C) 2003-13 Intel Corporation. All Rights Reserved.
USER CONSENT
User Opt-in
Opt-in Configurable from Remote IT
Configure When User Consent Should be Required.
[↑↓] = Move Highlight
[Enter] = Select Entry
18.
In the User Consent menu, select User Opt-in then press Enter. Select None then
press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808
Copyright(C) 2003-13 Intel Corporation. All Rights Reserved.
USER CONSENT
User Opt-in
Opt-in Configurable from Remote IT
NONE
KVM
ALL
[↑↓] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes
Chapter 9 Intel AMT Settings
Chapter 9
< KVM>
< Enabled>
[Esc]= Exit
< KVM>
< Enabled>
19.
In the User Consent menu, select Opt-in Configurable from Remote IT then press
Enter. Select Disable Remote Control of KVM Opt-in Policy then press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808
Copyright(C) 2003-13 Intel Corporation. All Rights Reserved.
USER CONSENT
User Opt-in
Opt-in Configurable from Remote IT
[↑↓] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes
20.
Select Previous Menu until you return to the Intel(R) AMT Configuration menu. Select
Password Policy then press Enter.
You may choose to use a password only during setup and configuration or to use a pass-
word anytime the system is being accessed.
Intel(R) Management Engine BIOS Extension v9.0.0.0029/Intel(R) ME v9.5.30.1808
Copyright(C) 2003-13 Intel Corporation. All Rights Reserved.
INTEL (R) AMT CONFIGURATION
Manageability Feature Selection
> SOL/ IDER/ KVM
> User Consent
Password Policy
> Network Setup
Unconfigure Network Access
> Remote Setup And Configuration
> Power Control
[↑↓] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes
70
< KVM>
< Enabled>
Disabled
Enabled
< Enabled>
<Anytime>
<Full Unprovision>
Default Password Only
During Step And Configuration
Anytime
www.dfi.com