Table of Contents
Advertisement
Chapter 9 - Intel AMT Settings
Overview
Intel Active Management Technology (Intel
®
provide maximum system defense and protection to networked systems.
The hardware and software information are stored in non-volatile memory. With its built-in
manageability and latest security applications, Intel
• Discover
Allows remote access and management of networked systems even while PCs are powered off;
significantly reducing desk-side visits.
• Repair
Remotely repair systems after OS failures. Alerting and event logging help detect problems
quickly to reduce downtime.
• Protect
Intel AMT's System Defense capability remotely updates all systems with the latest security
software. It protects the network from threats at the source by proactively blocking incoming
threats, reactively containing infected clients before they impact the network, and proactively
alerting when critical software agents are removed.
Chapter 9 Intel AMT Settings
AMT) combines hardware and software solution to
AMT provides the following functions.
®
Chapter 9
Enable Intel
AMT in the AMI BIOS
®
1. Power-on the system then press <Del> to enter the main menu of the AMI BIOS.
2. In the Advanced menu, select AMT Configuration.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main
Advanced
Chipset
ACPI Settings
Trusted Computing
CPU Configuration
SATA Configuration
Intel(R) Rapid Start Technology
AMT Configuration
USB Configuration
PCH-FW Configuration
NCT6106D Super IO Configuration
NCT6106D HW Monitor
Power Failure Control
WatchDog Configuration
Network Stack
Intel(R) Ethernet Connection I218-LM - 88:88:88:88:87:88......
Intel(R) I210 Gigabit Network Connection - 00:01:29:50:......
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
3. In the Advanced menu, select Enable in the AMT field.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Intel AMT
Hide Un-Configure ME Confirmation
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
64
Boot
Security
Save & Exit
System ACPI Parameters
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Enable/ Disable Intel(R)
[Enabled]
Active Management Tech-
[Disabled]
nology BIOS Extension.
Note: iAMT H/W is
always enabled.
This option just controls
the BIOS extension execu-
tion. If enabled, this re-
quires additional firmware
in the SPI device.
Select Screen
→ ←:
Select Item
↑↓:
Enter:
Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC:
Exit
www.dfi.com
Advertisement
Table of Contents
