Advertisement
Installing a SODIMM
1. The SODIMM sockets are located on the system board. You need to revmove
the system cover first. Before working inside your system, observe the
following precautions:
(1) Make sure the system and all other peripherals connected to it have been
powered off.
(2) Disconnect all power cords and external cables.
2. The 4 mounting screws on the bottom of the system are used to secure the
cover to the chassis. Remove these screws and put them in a safe place for
later use.
3. The SODIMM sockets are under the supporting bracket.
Supporting bracket
SODIMM sockets
3
Advertisement
