SATA (Serial ATA) Connectors
Features
• 1 Serial ATA 3.0 port with data transfer rate up to 6Gb/s
• Integrated Advanced Host Controller Interface (AHCI) controller
• Supports Intel
Smart Response Technology
®
The Serial ATA connector is used to connect Serial ATA device. Connect one end of the Serial
ATA data cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to chapter 7 for more information.
Chapter 5 Ports and Connectors
Chapter 5
1
GND
TXP
SATA 1
TXN
GND
RXN
RXP
GND
7
SATA 3.0 6Gb/s
SATA (Serial ATA) Power Connector
The SATA power connector supplies power to the SATA drive. Connect one end of the provided
power cable to the SATA power connector and the other end to your storage device.
24
SATA
Power
+12V
1
Ground
Ground
4
+5V
www.dfi.com