Setting The Remote Device Transmission Timeout - Canon iR6020i Copying Manual

Setting the Remote Device Transmission
Timeout
A remote copy job is cancelled if there is no response from the remote copy printer within a given
time. Select a timeout setting from 5 to 30 seconds in 1-second increments.
NOTE
•
Jobs that reach the timeout limit (without arriving at the remote copy printer) are deleted.
•
The default timeout setting is <30 seconds>.
1
Call up the desired screen as follows:
→ [Copy Settings] → [
2
Use [–] and [+] to set the Remote Device Transmission Timeout, and
press [OK].
You can also enter values using
The specified mode is set.
3
Press [Done] repeatedly until the Basic Features screen appears.
M
] → [Remote Device Transmission Timeout]
- (numeric keys).
9
0

Setting the Remote Device Transmission Timeout

3
3-19