Canon iR6020i Copying Manual page 137

1
If you select [Adjust Each Dim.], press [Top], [Left], [Center], [Right], and [Bottom] to set the frame
width to erase by using [–] or [+], and press [Next].
When entering values in millimetres, you can use
If you enter values using
pressing [–] or [+].
The screen for the next step is displayed.
If you enter a value outside the setting range, a message appears on the screen prompting you to
enter an appropriate value.
NOTE
•
If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the
Additional Functions beforehand. (See "Chapter 3 Selecting and Storing Settings to Suit Your
Needs" in the Reference Guide.)
•
The default settings are 10 mm for [Center], and 4 mm for [Top], [Left], [Right], [Bottom], and
[Sides]. The maximum frame erase width area is 50 mm.
3
Select the facing-page original size, and press [OK] → [Done] in this order.
The specified mode is set, and the display returns to the Basic Features screen.
NOTE
•
To select an inch series paper size, press [Inch-size].
- (numeric keys), you can change the entered values by
9
0
Erasing Shadows and Frame Lines from Copies (Frame Erase)
- (numeric keys) and
0 9
2
.
C
2-33