1
3
Select the original paper size, and press [OK] → [Done] in this order.
The specified mode is set, and the display returns to the Basic Features screen.
IMPORTANT
•
You can set the Original Frame Erase mode only for the original paper sizes shown on the touch
panel display.
NOTE
•
To select an inch series paper size, press [Inch-size].
4
Press
Copying starts.
NOTE
To cancel this setting, press [Special Features] → [Frame Erase] → [Cancel] in this order.
•
•
To cancel all settings and return the machine to the Standard mode, press
.
Erasing Shadows and Frame Lines from Copies (Frame Erase)
2
.
2-31