1
2
Select the Margin type, and set the Margin Width.
IMPORTANT
•
If you are using the Margin and Two-sided modes together and copying an original that already
has a margin, follow the instructions below:
- 1 2-Sided: Set the margin for the back only.
- 2 2-Sided: You do not need to set a margin. Proceed to make copies in the usual way.
- 2 1-Sided: Set the margin for the back only.
•
If you are using the Margin and Two-sided modes together and copying an original that does not
have a margin, follow the instructions below:
- 1 2-Sided: Set the margin for both the front and back.
- 2 2-Sided: Set the margin for both the front and back.
- 2 1-Sided: Set the margin for both the front and back.
NOTE
•
If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the
Additional Functions beforehand. (See "Chapter 3 Selecting and Storing Settings to Suit Your
Needs" in the Reference Guide.)
•
The default setting is 10 mm.
Making Copies with Margins (Margin)
2
2-25