Interrupting The Current Job To Make Priority Copies (Interrupt Mode) - Canon iR6020i Copying Manual

Interrupting the Current Job to Make Priority
Copies
(Interrupt Mode)
The Interrupt mode enables you to interrupt a reserved or current job long enough to make higher
priority copies. This mode is useful if you need to make a rush copy during a long copy job.
1
IMPORTANT
•
You cannot process remote and cascade copy jobs in the Interrupt mode.
NOTE
•
You can make interrupt copies, if the machine is ready to scan.
1
Press [Interrupt].
If you want to make copies after changing the Department ID while Department ID Management is
enabled, press
Using This Machine" in the Reference Guide.)
NOTE
•
2
Place your originals, and select the desired copy modes.
NOTE
•
•
1-86

Interrupting the Current Job to Make Priority Copies (Interrupt Mode)

, and enter the Department ID and Password. (See "Chapter 1 Before You Start
ID
When you press [Interrupt], the current job being processed is not interrupted until the interrupt
copy starts printing.
To cancel the Interrupt mode, press [Interrupt].
To cancel the copy mode only, press . (The Interrupt mode will not be cancelled.)