Copying While Verifying Scanned Images (Scan Image Check) - Canon iR6020i Copying Manual

Copying While Verifying Scanned Images
(Scan Image Check)
This enables you to confirm scanned images page by page while copying them when you scan
originals in succession on the platen glass. This is useful to prevent miscopying resulting from
misscanning.
IMPORTANT
•
When the machine is operating in the Scan Image Check mode, you cannot use the Remote or Cascade
Copy, 2 2-Sided, 2 1-Sided, Book 2-Sided, Two-Page Separation, Image Combination, Image
Separation, Transparency Interleaving, Booklet, Image Repeat, and Form Composition modes.
•
When 1 2-Sided is set, two-sided copying is not performed and the machine copies each original at
a time.
•
The originals must be set on the platen glass. You cannot copy using Scan Image Check mode with the
originals set in the Feeder.
1
Place your originals on the platen glass, and press [Special Features] →
M
[ ] in this order.
2
Press [Scan Image Check], and press [Done].
3
Press
Scanning starts and the image is printed.
NOTE
•
To cancel scanning, press [Cancel] or press
.

Copying While Verifying Scanned Images (Scan Image Check)

.
2
2-81