Canon iR6020i Copying Manual page 139

1
3
Set the width of the binding erase by pressing [–] or [+], and press [OK] →
[Done] in this order.
When entering values in millimetres, you can use
If you enter values using
pressing [–] or [+].
The specified mode is set and the display returns to the Basic Features screen.
If you enter a value outside the setting range, a message appears on the screen prompting you to
enter an appropriate value.
NOTE
•
If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the
Additional Functions beforehand. (See "Chapter 3 Selecting and Storing Settings to Suit Your
Needs" in the Reference Guide.)
•
The default setting is 18 mm for the binding erase width. The maximum binding erase width area
is 20 mm.
4
Press
Copying starts.
NOTE
To cancel this setting, press [Special Features] → [Frame Erase] → [Cancel] in this order.
•
•
To cancel all settings and return the machine to the Standard mode, press
- (numeric keys), you can change the entered values by
0 9
.
Erasing Shadows and Frame Lines from Copies (Frame Erase)
- (numeric keys) and
9
0
2
.
C
.
2-35