Network Setting Items Using Netspot Console, Netspot Device Installer, Or A Web Browser (Remote Ui) - Canon IMAGECLASS MF8180C Network Manual

Network Setting Items Using NetSpot Console, NetSpot Device
Installer, or a Web Browser (Remote UI)
You can change the settings of the machine with NetSpot Console, NetSpot Device
Installer, or a web browser (Remote UI). The setting items you can change are
shown below.
■ Common Settings
3
Device Name
Location
Administrator
Phone
Contact Person
Phone
Administrator Password
Permit End-user's Job
Operation*
Link**
URL**
Comments**
NOTE
Items with an asterisk (*) cannot be set using NetSpot Device Installer. Items with
asterisks (**) cannot be set using NetSpot Device Installer and NetSpot Console. Set
them using the Remote UI.
3-4 Network Setting Items
Item
Device name (0 to 63 characters)
Device installation location (0 to 63
characters)
Device administrator name (0 to 63
characters)
Telephone number of contact person (0 to 63
characters)
Contact person's name (o to 63 characters)
Telephone number of contact person (0 to 63
characters)
Device password (0 to 15 characters)
Whether or not to permit operating print job
in general user mode
Link name displayed on support link page of
the Remote UI
URL displayed on support link page of the
Remote UI
Comments displayed on support link page of
the Remote UI
Setting Description
Default
Setting
(null)
(null)
(null)
(null)
(null)
(null)
(null)
(Off)
(null)
(null)
(null)