Changing The Current Standard Settings; Storing New Standard Settings For Copying - Canon iR6020i Copying Manual

Changing the Current Standard Settings

Standard Settings refers to a combination of copy modes that the machine automatically sets after
the power is turned ON or when
This section describes how to customise Standard Settings to suit your needs, or return the
Standard Settings to their default settings.
IMPORTANT
•
Even if a remote copy printer is stored in Standard Settings, if the main power of this machine or the
remote copy printer is turned OFF and ON again, the stored settings change to Local Printer. To use the
3
stored remote copy printer as the Standard Setting, it is necessary to register the Standard Settings
again.
NOTE
•
The default settings are as follows:
- Copy Quantity: 1
- Paper Selection: Automatic Paper Selection
- Exposure/Image Quality: A
- Copy Ratio: 1:1 (100%)
- Copy Function: 1 1-Sided Copy
- Copy Device: Local Printer

Storing New Standard Settings for Copying

To store copy settings as Standard Settings, specify the settings you want to store from the Basic
Features screen and/or Special Features screen, and follow the procedure below.
NOTE
•
You must have Copy Settings already stored as Standard Settings before you change or create new
Standard Settings. (See "Flow of Copy Operations", on p.1-10.)
1
Call up the desired screen as follows:
3-10

Changing the Current Standard Settings

is pressed.
M
→ [Copy Settings] → [ ] → [Standard Settings]