Reserving A Copy Operation During Printing - Canon iR6020i Copying Manual

Reserving a Copy Operation During Printing

While printing, other originals can be scanned and copy modes can be set. After printing has been
completed, printing for a reserved copy job can start immediately. Therefore, the time needed to
scan the original can be saved.
NOTE
•
You can reserve up to five copy jobs, including the current job. However, remote copy and Interrupt copy
1
jobs are not included in this count.
1
Press [Done] on the pop-up screen displayed while printing.
If the job displayed on the touch panel display is a function other than a Copy function, press
[Done]. Then, press [Copy] to display the Basic Features screen.
NOTE
•
2
Place your originals, and select the desired copy modes.
NOTE
•
1-84 Reserved Copying
To reserve a copy job with the same settings as the previous copy job, place the original and,
without pressing [Done], press
To cancel only the copy mode, press
to start scanning.
.
1