Canon iR6020i Copying Manual page 32

To use the machine for Cascade Copying, press [Cascade Copy] and select whether to execute
Error Recovery.
- [On]: Assigns the remaining copy job to the normally-operating printer if an error occurs in either
- [Off]: Does not assign the remaining copy job to the normally-operating printer if an error occurs
1
If you press [Details], the detailed information for the selected printing destination is displayed.
The display returns to the Basic Features screen.
NOTE
•
•
1-22 Selecting an Output Device (Select Output Device)
this machine or the remote copy printer.
A machine in which an error occurs cannot resume the remaining copy job after the copy
job is reassigned even if the machine recovers.
in either this machine or the remote copy printer.
You must choose a remote copy printer that supports the selected copy settings. The printers that
do not support the chosen settings are shown, but are greyed out. And, even if the remote copy
printer supports the Copy mode, if you select settings other than Collate and Group, you can
select only a remote copy printer equipped with the same finisher as the original copy machine.
It is impossible to choose two different machines, other than your own for cascade copying. You
must include your own machine as one of the output devices.
1