G If you select [Left Margin] or [Right Margin]:
Use [–] or [+] to set the margin for the front and back (0 to 20 mm). Then, press [OK] →
[Done] in this order.
2
The specified mode is set, and the display returns to the Basic Features screen.
G If you select [Top Margin] or [Bottom Margin]:
Use [–] or [+] to set the margin (1 to 20 mm). Then, press [OK] → [Done] in this order.
When entering values in millimetres, you can use
If you enter values using
[–] or [+].
The specified mode is set, and the display returns to the Basic Features screen.
If you enter a value outside the setting range, a message appears on the screen prompting you to
enter the appropriate value.
3
Press
Copying starts.
NOTE
•
•
2-26
Making Copies with Margins (Margin)
-
0
.
To cancel this setting, press [Special Features] → [Margin] → [Cancel] in this order.
To cancel all settings and return the machine to the Standard mode, press
-
0
9
9
(numeric keys), you can change the entered values by pressing
(numeric keys) and
.
C
.
1