Canon iR6020i Copying Manual page 186

4
Confirm the contents of the printout, and scan the next original.
To re scan the image immediately after an original has scanned, replace the original and put a
check mark (
If you want to change the copy settings, make the changes before pressing
- You can adjust the Exposure and the Image Quality.
- You can change the number of copy sets.
2
5
After all originals are scanned, press [Done].
Copying starts.
NOTE
•
•
2-82 Copying While Verifying Scanned Images (Scan Image Check)
) next to [Re-Scan], and press
(See "Adjusting Exposure and Image Quality (Copy Exposure)", on p.1-32.)
(See "Entering the Copy Quantity", on p.1-17.)
To cancel this setting, press [Special Features] → [
To cancel all settings and return the machine to the Standard mode, press
.
M
] → [Scan Image Check] in this order.
1
.
.