Setting The Job Duration Display - Canon iR6020i Copying Manual

Setting the Job Duration Display

When the Job Duration Display is set to <On>, the time remaining until completion of the copy job
(Job Duration Time) is indicated in minutes on the touch panel display. (The job duration time is not
displayed for some copy modes.)
NOTE
•
The job duration time is shown as the <Print Time> on the screen displayed during printing.
•
The job duration time is not displayed for the Remote or Cascade Copy, Transparency Interleaving,
Cover/Sheet Insertion, Different Size Originals, Rotate Collating, and Rotate Grouping modes, or when
the copy waiting time is less than one minute.
•
The default setting is <Off>.
1
Call up the desired screen as follows:
→ [Copy Settings] → [Job Duration Display]
2
Select [On] or [Off], and press [OK].
The specified mode is set.
3
Press [Done] repeatedly until the Basic Features screen appears.

Setting the Job Duration Display

3
3-7