Braking system
Hydraulic operation
Bravo-Brava l§i
12v
33.
P4A01 DA03
P4A01 DAOB
P4A01 DA04
REMOVING-REFITTING BRAKE PUMP
Proceed as follows to remove the brake
pump:
1. Disconnect the pipe connecting air clean
er to butterfly valve cause by undoing the
fastenings indicated in figure.
2. Remove the relay cover.
3. Remove the relay bracket by undoing the
bolts retaining it to the body, disconnect
connector indicated and move the bracket
to one side.
4. Remove the retaining stud of the lining of
the
bulkhead
between
lining to one side.
5. Remove the cap from the brake and clutch
fluid reservoir after disconnecting the fluid
level sensor connector. Then drain the flu
id from the reservoir.
P4A02DA01
4
Publication no. 508.876