Valve Assembly; Removing-Refitting Valve Assembly - Fiat 1996 Brava Service Manual

Bravo-Brava @i
16v
Auto transmission & differential
Valve assembly
21-27.
Replacing differential oil seal
Disconnect the drive shaft from the differen­
tial as described above, then remove the oil
seal from the differential, using a screwdriver
as a lever.
When refitting, use the drift 1870629000
with an appropriate handle.
wj^m Operate with care to avoid damaging
'JVR the oil seal and causing leaks.
REMOV1NG-REFITTINGVALVE ASSEMBLY
Place the car on ramps, disconnect the bat­
tery's negative pole, drain the gearbox oil,
then proceed as described below, working
from under the vehicle:
1. Place a hydraulic jack under the bellhous-
ing, then remove the power unit mounting
on the gearbox side to allow the valve as­
sembly cover to be removed.
2. Undo the bolts securing the valve assem­
bly cover and remove the cover.
3. Disconnect the valve assembly solenoid
supply connectors, disengage the gearbox
oil temperature sensor (1) from its mount­
ing bracket and move the wiring aside.
Copyright Fiat Auto
67