Fiat 1996 Brava Service Manual page 536

Bravo-Brava ^ ** Auto
P4AB9AB04
Copyright Fiat Auto
transmission & differential
Removing-refitting
21-27.
1. Remove the power unit central mounting
by undoing the bolts shown in the figure.
2. Remove the power unit mounting on the
gearbox side by undoing the bolts shown
in the figure.
3. Remove the bottom bolts securing the
gearbox to the engine.
4. Gently separate the bellhousing from the
engine, then manoeuvre the converter
back into its seating. For greater safety, fit
a bracket, to be manufactured on site,
screwing it into the seat of the bolt secur­
ing the gearbox bottom guard, to prevent
the converter falling out of its seating.