Electrical equipment
Radio equipment
Bravo-Brava
98 range
55.
Automatic programme change (REGION
AL)
When the RDS programme consists of vari
ous
regional
broadcasts, the
radio
may
switch between transmitters, selecting the
one w i t h the most powerful signal.
The frequency selection buttons required are
button 5 (1) for switching the function on
and button 4 (2) for switching it off.
The messages displayed will be "RES O N "
when the function is switched on and "RES
OFF" when the function is switched off.
LOC function
This makes it possible to search for FM fre
quencies according to their
transmission
power.
With the LOC function selected, the radio
system searches for the most power broad
casting stations whilst if the function is not
selected the search is also extended to less
powerful transmissions.
To activate the LOC function, press the fre
quency selection button 5 (1) until the mes
sage "LOC O N " appears on the display. To
deactivate the function selected previously,
press frequency selection button 4 (2) until
the message "LOC OFF" appears on the dis
play.
M O N O function
The M O N O function makes it possible to set
the radio equipment to stereo or mono repro
duction. In the case of a stereo broadcast,
there are t w o different channels, whilst in the
case of a MONO broadcast there is one chan
nel only. For good quality sound, the setting
should correspond to the type of transmis
sion (Stereo or M O N O ) .
To select the M O N O function, press frequen
cy selection button 5 (1) until the message
" M O N O O N " appears on the display. To de
activate the M O N O function, press the fre
quency selection button (2) until the mes
sage " M O N O OFF" appears on the display.
74
XR-9&; UpdAe
Print no. 506.670/17