Fiat 1996 Brava Service Manual page 811

Bravo-Brava ty
TD 75
Clutch
Clutch operation
18.
1 - \
3?
11
Iff
cj^^ss&y
II (<m>
p§
3
/ L^sk
©pC;
38
0^i§
Jo ^
jT/f
1. Release the relay box from the battery cra­
dle by undoing the retaining bolts. Then
remove the cradle by undoing the bolts in­
dicated and disconnecting the wiring
bundle.
2. Unscrew the fitting of the pipe connected
to the clutch pump on the slave cylinder,
detach the pipe from the retaining clips
and remove from the car.
REMOVING-REFITTING SLAVE CYLIN­
DER
Drain the brake and clutch fluid, re­
move the battery, the cradle and the
relay box as described in the previous
paragraph.
Undo nuts retaining bracket (1) and re­
move; disconnect the clips indicated and
remove the flow meter in order to gain ac­
cess to the underlying slave cylinder.
Disconnect the fitting of the pipe con­
nected to the clutch pump, then unscrew
the slave cylinder retaining bolts and re­
move from the car.
fly
Bleeding clutch system
Copyright Fiat Auto
11