Introduction
Planned maintenance
Bravo-Btava
00.
1. Rotate the crankshaft in its normal direc
tion of rotation until the references on the
crankshaft pulley and the injection pump
drive pulley are in line with the fixed refer
ences on the engine. Cylinder no. 1 will
be at T.D.C., under these circumstances
and the camshaft will be timed for the ex
plosion stroke in cylinder no. 1.
NOTE
The fixing opening for the camshaft
drive pulley has a slot on account of
which under these circumstances
the reference on it should not coin
cide exactly with the fixed reference
on the cover.
2. Loosen the belt tensioner nut, then remove
the timing drive belt.
P4A40CA02
40
Print no. 506.670/09