Bravo-Brava
Introduction
Planned maintenance
oo.
Bravo-Brava 1747 16v
Position the vehicle on a lift, then:
- disconnect the negative battery lead;
- remove the right front wheel;
- remove the right wheel arch liner.
Loosen the tension for the auxiliary shaft
drive belt acting in an anti-clockwise di
rection on the centre nut for the automatic
tensioning device to release the spring in
side the actual device; then fit the belt.
Remove the fixed pulley for the auxiliary
shaft drive belt, then undo the upper and
lower bolts fixing the timing belt shield
and remove it.
3. Remove the cover for the ignition coils,
disconnect the connections from the coils,
the earth cable (1) and the oil vapour re
covery pipe from the cylinder head cover.
Disconnect the connector from the air
conditioning compressor, release the ca
ble and remove the cylinder head cover
acting on the fixing bolts shown in the di
agram.
Copyright by Fiat Auto
29