Fiat 1996 Brava Service Manual page 742

Bravo-Brava
9 8 r a n g e
Electrical equipment
Radio equipment
SRC
55.
Manual programming of a transmitter
Select the frequency by repeatedly pressing
the BAND control (1). The display will s h o w
the band selected: " F M 1 " , " F M 2 " , " F M 3 " ,
" M W " or "LW".
Press one of the buttons " A " " ▼ " (2,3) for
about 6 seconds until the message " M A N "
appears on the display and the radio frequen­
cy is tuned in. It is possible t o alter the t u n i n g
frequency using the " A " " T " buttons.
The station being listened to can be memo­
rized in the frequency range selected using
the frequency selection buttons
(1,2,3,4,5,6). To programme it press the
pre-selected frequency selection button until
the radio can be heard once again.
The manual tuning can be concluded at any
time by pressing one of the frequency selec­
tion buttons or if no buttons are pressed for
sixty seconds.
Listening to programmed stations
Proceed as follows:
1. Select the desired band using the B A N D
control (1).
2. Briefly press one of the frequency selec­
tion buttons (1,2,3,4,5,6).
The display will show the button pressed and
the transmitter code if it is an RDS transmit­
ter.
If the transmitter selected offers an RDS ser­
vice and the reception is not good, the radio
will search for an alternative frequency. The
display will show "SRC" during the search.
TP Function (TRAFFIC PROGRAM)
Several stations beloning to RDS1, RDS2 bands also broadcast traffic news. With the TP (Traffic Pro­
gram) function it is possible to:
a) search for RDS stations only broadcasting traffic news;
b) receive traffic news even if the cassette player or Compact Disc player are working;
c) receive traffic news at a pre-set quiet volume even w i t h radio volume at zero.
Copyright by Fiat Auto XI-98 - Update 43