Introduction
Planned maintenance
Bravo-Brava
00.
Remove the spark plugs using a special
spanner. Position the dial gauge by cylin
der no. 1 using support 1895879000, ro
tate the crankshaft until T.D.C. is detected.
Remove the 2nd cap fixing the inlet side
camshaft and the 3rd cap fixing the ex
haust side camshaft, as shown in the dia
gram.
When the camshaft caps are re
moved, they must be marked so that
they can be refitted in the correct po
sition. If this is not the case, there
could be problems with the reliability
of the camshafts.
3. Position
and
fix
the
pair
of
tools
1860875000 by the previously removed
caps.
The pair of tools 1860875000 should
exact follow
the profile
of
the
camshaft cams.
Remove the lower gearbox protective
cover
and
place
flywheel
lock
1860898000 in position. Then remove
the damper flywheel (auxiliary shaft drive
pulley).
30
Print no.
506.670/09