Fiat 1996 Brava Service Manual page 462

Engine
Fuel system
10.
Bravo-Brava ^
'98 range
Removing - refitting lambda probe
- Place the car on ramps.
- Disconnect the battery's negative cable.
- Disconnect the wiring connector installed
against the rear wall of the engine compart­
ment.
Remove the Lambda probe from its seating
on the exhaust pipe.
E
When refitting, smearANT I SEIZE MA -
TERIA-BORON NITRIDE N.G.K.
SPARK PLUG CO-L TD. grease on the
threaded part.
Tightening torque 3.5 - 4.5 dalUm
50
Publication no. 506.670/14