Fiat 1996 Brava Service Manual page 551

Gearbox and differential
Removing-refitting
21.27
Bravo-Brava igp **
9 8 r a n g e
1. Remove the button fixing the dust shield
to the bodyshell, then undo the bolts and
release the shield from the housing. Re­
peat the operation for the dust shield on
the other side.
2. Remove the bolts fixing the shock ab­
sorber to the steering knuckle and rotate
the steering knuckle towards the inside,
releasing the brake pipe from the shock
absorber. Repeat the operation on the
other side.
3. Undo the fixing nut the steering track rod
end to the steering knuckle, then, using
tool 1847038000, disconnect it from the
steering knuckle. Repeat the operation for
the steering track rod end on the other
side.
4. Position a container for recovering the
transmission fluid, then undo the plug
shown and drain the oil from the gearbox.
4
Print no. 506.670/17