Introduction
Planned maintenance
Bravo-Brava
00.
P4A12AX03
Qj] REPLACE TIMING BELT
Bravo-Brava 1370 12v
Position the vehicle on a lift, then:
- disconnect the negative battery lead;
- remove the right front wheel;
- remove the right wheel arch liner to gain
access to the auxiliary shaft drive belt.
1. Loosen the auxiliary shaft drive belt ten
sion acting on the centre nut for the auto
matic tensioning device to release the
spring inside the actual device. Then re
move the actual belt from the damper fly
wheel leaving it fitted on the power steer
ing pump pulley; it is not necessary to re
move the upper shield for the power as
sisted steering pump.
2. Remove the upper shield for the timing
drive belt after having removed the sup
port for the coolant pipe.
3. Loosen the bolts fixing the damper fly
wheel, then rotate the latter until the refer
ence on it coincides with the reference on
the shield underneath. Then, remove the
damper flywheel.
4. Remove the lower timing belt lower
shield.
20
Print no. 506.670/09