Integration Server Authentication - Ricoh C3030 Operating Instructions Manual

P
Enter the unique attribute and then press [OK].
Note
❒ Specify Unique Attribute on the machine to match the user information in
the LDAP server with that in the machine. By doing this, if the Unique At-
tribute of a user registered in the LDAP server matches that of a user reg-
istered in the machine, the two instances are treated as referring to the
same user.You can enter an attribute such as "serialNumber" or "uid". Ad-
ditionally, you can enter "cn" or "employeeNumber", provided it is unique.
If you do not specify the Unique Attribute, an account with the same user
information but with a different login user name will be created in the ma-
chine.
Q
Press [OK].
R
Press the {User Tools/Counter} key.

Integration Server Authentication

To use Integration Server Authentication, you need a server on which ScanRout-
er software that supports authentication is installed.
For external authentication, the Integration Server Authentication collectively
authenticates users accessing the server over the network, providing a server-in-
dependent centralized user authentication system that is safe and convenient.
For example, if the delivery server and the machine share the same Integration
Server Authentication, single sign-on is possible using DeskTopBinder.
To use [Integration Svr. Auth.], the machine must have access to a server on which
Document System software and [Authentication Manager] are installed.
For details about the software, contact your local dealer.
Using Web Image Monitor, you can specify whether or not to check the reliabil-
ity of the SSL server being connected to.
Important
❒ During Integration Server Authentication, the data registered in the server,
such as the user's e-mail address, is automatically registered in the machine.
If user information on the server is changed, information registered in the ma-
chine may be overwritten when authentication is performed.
User Authentication
57
2